DVTEL CF-4221-00 Installationsanleitung PDF herunterladen (Seite 64)

DVTel CM-4221-01 Dome Camera User & Installation Guide

If Motion Detection function is activated, the pop-off window (Motion) with indication of

motion will be shown.

When motion is detected, the signals will be displayed on the Motion window as shown

below.

Detailed settings of Motion Detection are described as follows:

Motion Detection

You will be able to turn on/off Motion Detection in System section. Default setting is Off.

Motion Detection Setting

Users could adjust various parameters of Motion Detection in this section.

 Sampling pixel interval [1-100]:

The default value is 10, which means system will take one sampling pixel for

every 10 pixel.

 Detection level [1-100]:

The default level is 10. The item is to set detection level for each sampling pixel;

the smaller the value, the more sensitive it is.

 Sensitivity level [1-100]:

The default level is 80, which means if 20% or more sampling pixels are

detected differently, system will detect motion. The bigger the value, the more

sensitive it is. Meanwhile, when the value is bigger, the red horizontal line in the

motion indication window will be lower accordingly.

 Time interval (sec) [0-7200]:

The default interval is 10. The value is the interval between each detected

motion.

1 2 ... 59 60 61 62 63 64 65 66 67 68 69 ... 122 123

Keine Kommentare

DVTEL CF-4221-00 Installationsanleitung Seite 64